Tyan-computer S1854 Manual do Utilizador descarregar pdf (Página 78)

http://www.tyan.com

Make sure the lower lip of the

overhead clip is oriented towards the

opposite side of the CPU fan (see

Figure I left).

Removing CPU - Removal of the CPU is basically the

reverse order of the installation steps.

First remove the overhead clip. You need to push BOTH

side lock tabs (see Figure I above) towards the center of

the CPU in order to unlock it from the side braces. After

removing the overhead clip, you need to release the CPU

from the braces one side at a time. Press the center

release tab of one of the side braces (see Figure J

right) while gently pulling that side of the CPU out of its

slot. Repeat the procedure for the other side brace.

When both ends of the CPU is loose from the side

braces and the slot, you will be able to remove it from the

motherboard.

Figure H*

*The pictures shown are used to illustrate a

concept and may not represent your motherboard

Figure J

Appendix 2

Retention Module installation

Tab

Lowered lip

1 2 ... 73 74 75 76 77 78 79 80

Sem comentários

Tyan-computer S1854 Manual do Utilizador Página 78